Latch Release Cable, Removing And Installing: Installing
WARNING: This page is about a different variant/trim than selected.
Installation in reverse order of removal and note the following:
-- Engage the release cable nipple -3- in the coupling roller -2- and push the release cable into the cable bracket.
-- Position the housing cover -1- so that the printed line points toward the free coupling connection.
-- To release the latches evenly, adjust the release cable at the thumbwheel.
Installation in reverse order of removal and note the following:
-- Engage the release cable nipple -3- in the coupling roller -2- and push the release cable into the cable bracket.
-- Position the housing cover -1- so that the printed line points toward the free coupling connection.
-- To release the latches evenly, adjust the release cable at the thumbwheel.