Cigarette Lighter -U1-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different variant/trim than selected.
Install in the reverse order of removal while noting the following:
CAUTION:
Risk of injury due to the preglow from the removed cigarette lighter socket.
- Check the tab on the socket.
- After removing the socket, push the springs back together carefully.
-- Remove the support -1- from the : T40148 .
-- Slide the piston down and hold it in place.
-- Turn the thumbwheel -4- on the : T40148 counter-clockwise -arrow-. This loosens the release tabs -2- on the cigarette lighter -3- so the : T40148 can be removed.