12 V Socket 2 -U18- /12 V Socket 3 -U19-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different variant/trim than selected.
-- Remove the center console rear trim. Refer to CENTER CONSOLE REAR TRIM, REMOVING AND INSTALLING .
-- Socket trim: remove the blind cover.
-- Socket folding compartment: open the folding compartment and remove the lighter.
-- The release tabs -2- on the : T40148 must engage in the openings on the cigarette lighter -3- in direction of -arrow-. To do so, the threaded rod -1- must be slid all the way down.
-- Slide the : T40148 all the way into the cigarette lighter -1-.
-- Turn the thumbwheel -2- at the : T40148 clockwise all the way to the end stop.
- The plunger -2- is pulled up and the release tabs -1- are spreading in the : T40148 in direction of -arrows-.
-- Remove the cigarette lighter from the illumination ring with the Socket Illumination Bulb -L42- using the : T40148 .
-- Guide the wire out through the mount.