Dimension Overview

WARNING: This page is about a different variant/trim than selected.

Chassis	Distance between the Center of the Wheel and the Lower Edge of the Fender/Wheel Housing
	Front Axle		Rear Axle		Tolerance between the right and left
	Specified size	Tolerance	Specified size	Tolerance	Tolerance between the right and left
1BA	368 mm	± 10 mm	366 mm	± 10 mm	<= 10 mm
1BE	368 mm	± 10 mm	366 mm	± 10 mm	<= 10 mm
1BD	368 mm	± 10 mm	366 mm	± 10 mm	<= 10 mm
1BM	368 mm	± 10 mm	376 mm	± 10 mm	<= 10 mm
1BL	368 mm	± 10 mm	366 mm	± 10 mm	<= 10 mm
1BU / 1BH	391 mm	± 10 mm	398 mm	± 10 mm	Less than or equal to 10 mm
2MV	368 mm	± 10 mm	366 mm	± 10 mm	<= 10 mm
2MT / 1BC	386 mm	± 10 mm	384 mm	± 10 mm	Less than or equal to 10 mm
2MC / 2MS	367 mm	± 10 mm	371 mm	± 10 mm	<= 10 mm