Measurement Preparations For Calibrating/Aligning The Driver Assist Systems, Quick Access Mode

WARNING: This page is about a different variant/trim than selected.

Select the "quick access" mode on the wheel alignment computer when the driver assist systems need to be calibrated/aligned or the dynamic steering needs the basic setting.

Connect the battery charger for the battery support mode. Refer to BATTERY, CHARGING .
Position the front wheels so they are straight.
Check the DTC memory before starting a calibration/alignment. Fix all displayed entries.
Vehicle accurately aligned, suspension bounced and rocked several times
The vehicle exterior lamps are off.
All the vehicle doors are closed.