Check Valve With Vacuum Line In Engine Compartment, Removing And Installing, 3.0L TFSI Engine: Removing
WARNING: This page is about a different variant/trim than selected.
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING [CWGD] or AIR FILTER HOUSING, REMOVING AND INSTALLING [CYMC] .
-- Remove the bracket for the A/C compressor. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING FROM BRACKET .
-- Remove the vacuum line -2-.
-- Remove the bolt -1-.
-- If equipped, disconnect the vacuum line -3- by pressing the release buttons on both sides.
-- Remove the bolt -2- and remove the vacuum line -1- with the check valve.