Check Valve With Vacuum Line In Engine Compartment, Removing And Installing, 3.0L TFSI Engine: Installing

WARNING: This page is about a different variant/trim than selected.

Install in reverse order of removal and note the following:

Replace the O-rings after removing them.

TIP:

Coating the vacuum line with water (not with oil) makes it easier to remove.

-- Install the bracket for the A/C compressor. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING FROM BRACKET .

-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING [CWGD] or AIR FILTER HOUSING, REMOVING AND INSTALLING [CYMC] .