Right And Left Front Abs Wheel Speed Sensor -G45- / -G47-, Removing And Installing: Installing
WARNING: This page is about a different variant/trim than selected.
Install in reverse order of removal while noting the following:
- Clean the bolts and nuts before reusing.
- Replace damaged bolts and nuts.
- Replace the self-locking bolts and nuts after removal.
-- Before inserting the speed sensor, clean the inner surface of the hole and coat the speed sensor all around with Grease :G 000 650 .
-- After installing, turn the steering all the way to the left and right, to make sure the speed sensor wiring has sufficient clearance.