Overview - Parking Brake

Due to a mechanical or electrical fault, it may be required to manually loosen the parking brake in order to move the vehicle. Refer to PARKING BRAKE, MANUALLY LOOSENING .

Fig 1: Exploded View Of Parking Brake

Courtesy of AUDI OF AMERICA, LLC

1. Rear Brake Caliper
2. Seal
   • Replace after removing.
3. Bolt
   • 13 Nm
   • Always replace after removing.
   • Self-locking

     Always replace the self-locking nuts and bolts.

     Replace damaged bolts and nuts.

     Clean the bolts and nuts before reusing.

4. Electro-Mechanical Parking Brake Motor
   • Left Parking Brake Motor -V282-
   • Right Parking Brake Motor -V283-
   • Refer to LEFT AND RIGHT PARKING BRAKE MOTOR -V282- / -V283-, REMOVING AND INSTALLING 
5. ABS Control Module -J104-
   • With integrated control for the electro-mechanical parking brake
   • Refer to ABS Control Module -J104- /ABS Hydraulic Unit -N55-, REMOVING AND INSTALLING
6. Electromechanical Parking Brake Button -E538-
   • With Electromechanical Parking Brake Indicator Lamp -K213-
   • Removing and Installing. Refer to OVERVIEW - CONTROLS IN CENTER CONSOLE .
7. Instrument Cluster
   • With Instrument Cluster Control Module -J285- for the display of the indicator and warning lamps