Overview - Brake Pedal

WARNING: This page is about a different variant/trim than selected.

Fig 1: Exploded View Of Brake Pedal

Courtesy of AUDI OF AMERICA, LLC

Brake Pedal
- The path of the brake pedal must not be shortened by extra floor mats
- Refer to BRAKE PEDAL, DISCONNECTING FROM BRAKE BOOSTER
- Refer to BRAKE PEDAL, ATTACHING TO BRAKE BOOSTER
- Refer to BRAKE PEDAL, REMOVING AND INSTALLING
Bolt
- 8 Nm
- Holds the mounting pin in place
  Always replace the self-locking nuts and bolts.
  
  Replace damaged bolts and nuts.
  
  Clean the bolts and nuts before reusing.
Clip
- Replace after removing.
Nut
- 8 Nm
  Replace damaged bolts and nuts.
  
  Always replace the self-locking nuts and bolts.
  
  Clean the bolts and nuts before reusing.
Mounting Bracket
- For foot pedal assembly
- Refer to MOUNTING BRACKET, REMOVING AND INSTALLING
Mounting Pin
- For brake pedal
Clip
- Replace after removing.
Bolt
- 20 Nm
  Replace damaged bolts and nuts.
- Pedal bracket to steering column
  Always replace the self-locking nuts and bolts.
  
  Clean the bolts and nuts before reusing.
Pedal Rubber