Starter, Removing And Installing, Vehicles With 6-Cylinder TDI Engine: Installing
WARNING: This page is about a different variant/trim than selected.
Install in the reverse order of removal while noting the following:
Sealing Piece, Version 1:
-- Check the sealing piece -arrow- for the correct installation position.
TIP:
If the starter assembly is difficult to move, use a silicone-free lubricating spray.
Sealing Piece, Version 2:
-- Clean the contact surface -1- on the lower timing chain cover and on the sealing piece -2- with Cleaning Solution :D 009 401 04 .
-- Bond the sealing piece to the lower timing chain cover.
Continuation for all:
-- Connect the battery. Required actions. Refer to Connecting .