Starter, Removing And Installing, Vehicles With 4-Cylinder Engine: Removing

-- Disconnect the ground cable from the battery when the ignition is switched off. Refer to BATTERY, DISCONNECTING AND CONNECTING .

-- Remove the right engine support. Refer to ENGINE SUPPORT, REMOVING AND INSTALLING [CWGD] / ENGINE SUPPORT, REMOVING AND INSTALLING [CYMC] / ENGINE SUPPORT, REMOVING AND INSTALLING [DPAA] .

-- Remove the bolt -arrow-.

Fig 1: Identifying Plenum

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -5- and nut -4-.

Fig 2: Identifying Starter Overview

Courtesy of AUDI OF AMERICA, LLC

-- Remove the starter -1-, disconnect the connector -3- and free up the B+ wire -2-.