Overview - Cover And Cushion, Rear Seat Backrest, A5 Cabriolet

Fig 1: Exploded View Of Cover And Cushion, Rear Seat Backrest, A5 Cabriolet

Courtesy of AUDI OF AMERICA, LLC

1. Cushion
   • Covers and Cushions, Removing and Installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, REAR SEAT BACKREST, A5 CABRIOLET .
   • Cover and Cushion, Separating. Refer to COVER AND CUSHION, SEPARATING, REAR SEAT BACKREST .
2. Upholstery Clip
   • Always replace
   • For securing the cover to the cushion
   • Install at the same location with Upholstery Clip Pliers :VAG1634  .
3. Zip Fastener
   • Sewn into cover
4. Zip Fastener
   • Sewn into cover
   • Close with Closing Pliers :VAS6138 
5. Cover
   • Covers and Cushions, Removing and Installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, REAR SEAT BACKREST, A5 CABRIOLET .
   • Cover and Cushion, Separating. Refer to COVER AND CUSHION, SEPARATING, REAR SEAT BACKREST .
   • Check that there are no folds after installing
6. Zip Fastener
   • Sewn into cover
7. Clip
   • For attaching the cover to the backrest panel
   • Quantity: 2
8. Backrest Shell