Seat Pan Cover And Cushion, Separating: Removing
WARNING: This page is about a different variant/trim than selected.
-- Remove the cover and cushion. Refer to SEAT PAN COVER AND CUSHION, REMOVING AND INSTALLING .
-- Remove the cover -2- from the cushion -1- and cut upholstery clips -arrows- using pliers.
-- Cut through the remaining upholstery clips.
Equipment Versions with Seat Depth Adjuster:
-- Disengage the cover from the seat depth adjuster hooks -1 and 2-.
-- Release and disengage the molding -arrows-.
-- Remove the seat depth adjuster cushion from the cover.