LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 27 (Seat Frames) >> 72 Seat Frames >> Front Seats >> Seat Height Adjuster, Removing And Installing >> Upper Frame, Removing And Installing, Seat Height Adjustment Motor >> Installing

Upper Frame, Removing And Installing, Seat Height Adjustment Motor: Installing

WARNING: This page is about a different variant/trim than selected.
WARNING:

Repairing pyrotechnic components (for example the airbag and seat belt tensioner) incorrectly increases the risk of unintentional deployments when the battery is connected.

  • Pay attention to the safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS WHEN WORKING ON PYROTECHNIC COMPONENTS .
  • Before handling pyrotechnic components (for example, connecting a connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.
  • Follow all the instructions when installing the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .

Install in reverse order of removal and note the following:

-- If the seat pan upper frame is being replaced, reposition the attachments.

scientia non olet · About LEMON Manuals