Overview - Front Backrest, Super Sport Seat
WARNING: This page is about a different variant/trim than selected.
- Backrest
- Removing and Installing. Refer to FRONT BACKREST, REMOVING AND INSTALLING .
- Bolt
- Tightening specification. Refer to -Item 9-.
- Replace after removing.
- Self-locking
- Threaded holes for the bolts must be cleaned, for example, with a thread tap
- Quantity: 2
- Bolt
- 5 Nm
- Rivet
- Quantity: 3
- Side Bolster
- Removing and Installing. Refer to SIDE BOLSTER, REMOVING AND INSTALLING .
- Hook
- For backrest cover
- Removing and Installing. Refer to BACKREST COVER, REMOVING AND INSTALLING, SUPER-SPORT SEAT .
- Bolt
- 5 Nm
- Quantity: 2
- Side Bolster
- Removing and Installing. Refer to SIDE BOLSTER, REMOVING AND INSTALLING .
- Rivet
- Quantity: 3
- Bolt
- 5 Nm
- Quantity: 2
- Bolt
- 5 Nm
- Bolt
- Tightening specification. Refer to -Item 9-.
- Replace after removing.
- Self-locking
- Threaded holes for the bolts must be cleaned, for example, with a thread tap
- Quantity: 2
- Upholstery Wire
- Quantity: 2