Gliding Piece, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Move the front seat all the way to the rear in its highest position.
-- Unlock the backrest, fold forward and at the same time push the front seat all the way forward.
-- Remove the rear bolt from the tunnel-side seat rail. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Push the rocker switch -arrow A- from the gliding piece in the direction of the -arrow- and pull the gliding piece rearward.
-- Lightly pry the rear gliding piece -1- with a screwdriver and remove rearward from the seat rails -2-.