Outer Rear Three-Point Seat Belt, Removing And Installing, A5 SPORTBACK: Installing
Risk of injury due to involuntary deployment.
- Pay attention to the safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS WHEN WORKING ON PYROTECHNIC COMPONENTS .
- Before handling pyrotechnic components (for example, connecting a connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.
-- If parts of the seat belt system are removed due to an accident, replace the belt system bolts.
-- Insert the three-point seat belt with the anti-twist mechanism and bolt -2- into the mount -3-.
-- Push the three-point seat belt -1- all the way forward in direction of -arrow- and tighten the bolt at the same time.
Make sure the connectors are pushed in all the way and that they engage audibly.
Make sure the wires are not pinched.
Repairing pyrotechnic components (for example the airbag and seat belt tensioner) incorrectly increases the risk of injuries due to unintentional deployments when the battery is connected.
- The ignition must be on when connecting the battery.
- Make sure that no one is inside the vehicle at the time when the battery is connected.
-- Connect the battery ground cable with the ignition switched on. Refer to BATTERY, DISCONNECTING AND CONNECTING .
Repairing pyrotechnic components (for example the airbag and seat belt tensioner) incorrectly increases the risk of injuries due to unintentional deployments when the ignition is switched on.
- If the ignition is not switched on after the battery is reconnected - >>indicator lamps in the instrument cluster do not light up<< - the ignition (key/button) may only be switched on when the driver seat is positioned all the way back.
Installation is performed in reverse order of removal, noting the following: