Rear Seat Belt Latch, Removing And Installing, 3-Person Rear Seat: Removing

-- Remove the bench seat. Refer to BENCH SEAT/SINGLE SEAT, REMOVING AND INSTALLING .

Right Seat Belt Latch with Rear Center Belt End Fitting: 

-- If installed, free up and disconnect the connector -4- for the seat belt switch.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -1-.

-- Remove the belt end fitting -2- with the seat belt latch -3-.

-- Remove the clip and remove the seat belt latch.

• -arrow- : locating pin on floor panel

Center and Left Seat Belt Latch: 

Courtesy of AUDI OF AMERICA, LLC

-- If installed, free up and disconnect the connector -1- for the seat belt switch.

-- Remove the nut -4-.

-- Remove the seat belt latches -2 and 3-.

• -arrow- : locating pin on floor panel

Seat Belt Latches, Separating from Each Other: 

-- Free up the wires for the seat belt switch.

-- Drill out the rivet.