Washer Nozzles, Adjusting

WARNING: This page is about a different variant/trim than selected.

-- Adjust the spray nozzles for the windshield washer system. Refer to WINDSHIELD WASHER SYSTEM: CHECK SPRAY PATTERN AND ADJUST IF NECESSARY .

-- Clean the dirty washer nozzle if the spray field does not match the specifications.

Washer Nozzle, Cleaning:

CAUTION:

There is a risk of damaging the washer nozzles through improper handling.

- Do not use any objects to clean the washer nozzles.

-- Remove the washer nozzle. Refer to WASHER NOZZLES, REMOVING AND INSTALLING .

-- Rinse the washer nozzle with clean water opposite the spray direction.

-- To remove any remaining contaminants, the washer nozzle may only be blown out with compressed air in the opposite direction of the spray direction.

-- If the spray field still does not match the specifications, replace the washer nozzle.