Overview - Bulkhead
WARNING: This page is about a different variant/trim than selected.
- Lock Washer/Nut
- Nut: 2 Nm
- Heat Shield
- Overview. Refer to OVERVIEW - HEAT SHIELDS .
- Pass-Through
- For coolant lines
- Equipped on some models
- Can be replaced only with the heat shield
- Seal
- For the plenum chamber bulkhead
- Nut
- 8 Nm
- Quantity: 2
- Plenum Chamber Bulkhead
- Removing and Installing. Refer to PLENUM CHAMBER BULKHEAD, REMOVING AND INSTALLING .
- Pass-Through
- For the wiring harness
- Cover
- For the plenum chamber end plate
- Upper
- Molded Part
- For the plenum chamber end plate
- Cover
- For the plenum chamber end plate
- Lower