Evacuating And Charging Valve, Removing And Installing, Low And High Pressure Side: Notes

Special tools and workshop equipment required 

• Torque Screwdriver : VAS6494 
• Engine Bung Set: VAS6122 
• Refrigerant Sockets: T10364 

• There is additional information for the service connection. Refer to A/C System, General Information (R134a) or GENERAL DESCRIPTION - REFRIGERANT CIRCUIT COMPONENTS (R1234yf) .

Depending on the vehicle version installed in the left plenum chamber (near the brake fluid reservoir, as shown here) under the plenum chamber or in the left engine compartment