Condenser, Removing And Installing, RS Models: Installing
WARNING: This page is about a different variant/trim than selected.
Install in reverse order of removal and note the following:
-- There is refrigerant oil in the removed condenser that must be redelivered to the refrigerant circuit (with new condenser). Refer to Refrigerant Circuit Components, Replacing (R134a) or COMPONENTS, REPLACING (R1234yf) .
-- Evacuate and charge the refrigerant circuit. Refer to Refrigerant Circuit (R134a) or Working with A/C Service Station (R1234yf) (1 of 2) or Working with A/C Service Station (R1234yf) (2 of 2) .
-- Start the A/C system after charging the refrigerant circuit. Refer to A/C SYSTEM, STARTING AFTER CHARGING REFRIGERANT CIRCUIT .