Rear A/C Display Control Head -E265-, REMOVING AND INSTALLING, "High" A/C SYSTEM, A4 AND A5: Installing

WARNING: This page is about a different variant/trim than selected.

Install in reverse order of removal and note the following:

When replacing a Rear A/C Display Control Head -E265- -B-, ensure the exact allocation.
Check the clamps -E- are seated correctly on the Rear A/C Display Control Head -E265- -B-

-- Retrieve the Front A/C Display Control Head -E87- DTC memory and delete the displayed error if necessary. Use the Vehicle Diagnostic Tester.