Coolant Shut-Off Valve -N82-, REMOVING AND INSTALLING: Notes
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Hose Clamps - Up To 25mm: 3094 (or commercially available hose pinch-off pliers)
- Hose Clip Pliers: VAS6340
- Hose Clip Pliers: VAS6362
The Coolant Shut-Off Valve -N82- -A- is currently only installed in vehicles with certain engines in the right plenum chamber (for example, currently not installed on vehicles with a 1.8L and 2.0L TFSI engine). Refer to CONNECTION DIAGRAM - COOLANT HOSES [CWGD] or CONNECTION DIAGRAM - COOLANT HOSES [CYMC] ).