Left Rear Footwell Vent Temperature Sensor -G637-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different variant/trim than selected.
-- Move the left front seat all the way to the rear.
-- Switch off the ignition.
-- Remove the cover for the opening in the carpet on the left. Refer to CARPET, REMOVING AND INSTALLING .
-- Lift the left carpet -E- at the opening carefully until the Left Rear Footwell Vent Temperature Sensor -G637- -B- is accessible (installed in the air duct to the vent for the left rear footwell -D-).
-- Turn the sensor -B- 90° and remove it from the air duct to the vent for the left rear footwell -D-.
-- Disengage and remove the connector -A-.