Left Effects Speaker -R209- /Right Effects Speaker -R210-, REMOVING AND INSTALLING, COUPE: Removing
WARNING: This page is about a different variant/trim than selected.
-- Turn off the ignition and all electrical equipment and remove the ignition key.
-- Remove the speaker trim -1- from the rear shelf using the Trim Removal Wedge: 3409 .
-- Lift the speaker trim -1- until the connector on the Left Effects Speaker -R209- is accessible.
-- Release and disconnect the connector from the Left Effects Speaker -R209-.
-- Remove the speaker trim -1- with the Left Effects Speaker -R209-.
-- Remove the screws -arrows- from the Left Effects Speaker -R209- -1-.
-- Remove the Left Effects Speaker -R209- -1- from the speaker trim.