Overview - Main Fuse Panel
WARNING: This page is about a different variant/trim than selected.
- Main Fuse Panel
- On the battery
- Removing and Installing. Refer to MAIN FUSE PANEL ON BATTERY, REMOVING AND INSTALLING .
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Nut
- 18 Nm
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Line
- 7.5 Nm
- Allocation. Refer to the appropriate Wiring Diagram.
- Nut
- 7.5 Nm
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Bolt
- 3.5 Nm
- Line
- 7.5 Nm
- Allocation. Refer to the appropriate Wiring Diagram.
- Nut
- 7.5 Nm
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Battery Interrupt Igniter -N253-
- Removing and Installing. Refer to BATTERY INTERRUPT IGNITER, REMOVING AND INSTALLING .
- Nut
- Tightening specification. Refer to OVERVIEW - BATTERY INTERRUPT IGNITER .
- Replace after removing.
- Quantity: 2
- Connector
- For the Battery Interrupt Igniter -N253-