Secondary Air Injection Pump Motor -V101-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2020 Audi A5 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Depending on the model, preliminary work may be required. Refer to the appropriate Service Information .
-- Unclip the line -1-.
-- Disconnect the connector -2-.
-- Remove the nut -3-.
-- Press the releases -arrows- to and remove the wire.
-- Remove the resonator -4- from the bracket.
-- Remove the wire -1-.
-- Disconnect the connector -2-.
-- Remove the bolts -arrows- and remove the nut -1-.
-- Remove the Secondary Air Injection Pump Motor -- -2- with the bracket.