Overview - Secondary Air System
WARNING: This page is about a different car, the 2020 Audi A5 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Nut
- 8 Nm
- Bolt
- 9 Nm
- Nut
- 8 Nm
- Rubber Bushing
- Secondary Air Injection Pump Motor -V101-
- Secondary Air Injection Pump Motor -V101-, Removing and Installing. Refer to Secondary Air Injection Pump Motor -V101-, REMOVING AND INSTALLING .
- Clip
- Resonator
- Connecting Line
- From the Secondary Air Injection Pump Motor -V101- to the air filter housing
- Bolt
- 20 Nm
- Bolt
- 9 Nm
- Bolt
- 20 Nm
- Hose
- Bolt
- 9 Nm
- Double Bolt
- 9 Nm
- Secondary Air Injection Solenoid Valve -N112-
- Secondary Air Injection Solenoid Valve -N112-, Removing and Installing. Refer to Secondary Air Injection Solenoid Valve -N112-, REMOVING AND INSTALLING .
- Seal
- Replace after removing.
- Connecting Line
- From Secondary Air Injection Pump Motor -V101- on the Secondary Air Injection Solenoid Valve -N112-
- Bolt
- 9 Nm
- Nut
- 8 Nm
- Secondary Air Injection Sensor 1 -G609-
- Double Bolt
- 10 Nm
- Bracket
- For secondary air injection pump
- Clip