Overview - Fuel Tank, TDI Vehicles Rest Of World Market Version [XXXX]
WARNING: This page is about a different car, the 2022 Audi S5, 2021 Audi S5, 2020 Audi S5, and 2020 Audi A5 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 20 Nm
- Mounting Strap
- Secured to the fuel tank with expanding clips.
- Fuel Supply Line
- To the fuel filter
- Clipped to the fuel tank
- Do not kink
- Connector Couplings, Separating and Connecting. Refer to CONNECTOR COUPLINGS, DISCONNECTING .
- Fuel Return Line
- From the engine
- Do not kink
- Clipped to the fuel tank
- Connector Couplings, Separating and Connecting. Refer to CONNECTOR COUPLINGS, DISCONNECTING .
- Bolt
- 20 Nm
- Bolt
- Secures the fuel filler neck and works at the same time as the ground connection
- A4: quantity 2
- A5: quantity 3
- 8 Nm
- Secures the fuel filler neck and works at the same time as the ground connection
- Misfueling Guard
- Removing and installing. Refer to MISFUELING GUARD, REMOVING AND INSTALLING .
- Cap
- Turn until it clicks into place.
- Attached to the fuel filler door unit with fastening device
- Bushing
- 1 each
- Rubber Bushing
- Bolt
- Mounting Strap
- Secured to the fuel tank with expanding clips.
- Fuel Tank
- There are different versions. Refer to the Parts Information for the allocation.
- Removing and Installing. Refer to FUEL TANK, REMOVING, TDI VEHICLES .
- Bolt
- 20 Nm
- Spring Nut
- 2 Nm
- For the heat shield
- Quantity: 3
- Heat Shield
- For the fuel tank
- Bolt
- 20 Nm
- Bolt
- 20 Nm
- Mounting Strap
- Secured to the fuel tank with expanding clips.
- Fuel Supply Line
- To the fuel filter
- Clipped to the fuel tank
- Do not kink
- Connector Couplings, Separating and Connecting. Refer to CONNECTOR COUPLINGS, DISCONNECTING .
- Fuel Return Line
- From the engine
- Do not kink
- Clipped to the fuel tank
- Connector Couplings, Separating and Connecting. Refer to CONNECTOR COUPLINGS, DISCONNECTING .
- Bolt
- 20 Nm
- Bolt
- 8 Nm
- Secures the fuel filler neck and works at the same time as the ground connection
- Quantity: 2
- Misfueling Guard
- Removing and installing. Refer to MISFUELING GUARD, REMOVING AND INSTALLING .
- Cap
- Turn until it clicks into place.
- Attached to the fuel filler door unit with fastening device
- Bushing
- 1 each
- Rubber Bushing
- 1 each
- Bolt
- 20 Nm
- Mounting Strap
- Secured to the fuel tank with expanding clips.
- Heat Shield
- For the fuel tank
- Fuel Tank
- There are different versions. Refer to the Parts Information for the allocation.
- Removing and Installing. Refer to FUEL TANK, REMOVING, TDI VEHICLES .
- Bolt
- 20 Nm
- Mounting Strap
- Secured to the fuel tank with expanding clips.
- Bolt
- 20 Nm
- Spring Nut
- 2 Nm
- For the heat shield
- Quantity: 5
- Bolt
- 20 Nm