Fuel Gauge Sensor -G-, Removing And Installing: Installing

WARNING: This page is about a different car, the 2022 Audi S5, 2021 Audi S5, 2020 Audi S5, and 2020 Audi A5 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

NOTE:

Be careful not to bend the floater arm on the fuel level sensor when inserting.

Be careful to install the Fuel Gauge Sensor -G- into the same position it was removed from.

-- Guide the Fuel Gauge Sensor -G- carefully through the opening in the fuel tank.

-- Insert the Fuel Gauge Sensor -G- into the mount on the baffle housing and push downward until it engages.

-- Install the fuel delivery unit. Refer to FUEL DELIVERY UNIT/FUEL LEVEL SENSOR, REMOVING AND INSTALLING .