LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Fuel Supply [CYMC, CWGD]) >> 20 Fuel Supply >> EVAP System >> Fuel Tank Leak Detection Control Module -J909-, Removing And Installing >> Removing

Fuel Tank Leak Detection Control Module -J909-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi S5, 2021 Audi S5, 2020 Audi S5, and 2020 Audi A5 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the right rear underbody trim panel. Refer to OVERVIEW - UNDERBODY TRIM PANELS .

-- Release the connector safety catch and disconnect the connector -2-.

Fig 1: Fuel Tank Leak Detection Control Module -J909-
GWWA20-11555Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -arrows- and disengage the fuel tank leak detection control module -1- from the fuel tank.