LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Fuel Supply [CYMC, CWGD]) >> 20 Fuel Supply >> Accelerator Mechanism >> Accelerator Pedal Position Sensors -G79- / -G185-, Removing And Installing >> Removing

Accelerator Pedal Position Sensors -G79- / -G185-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi S5, 2021 Audi S5, 2020 Audi S5, and 2020 Audi A5 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the driver side instrument panel cover. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .

-- Press the release and disconnect the connector -2-.

Fig 1: Accelerator Pedal Position Sensor -G79- /Accelerator Pedal Position Sensor 2 -G185-
GWWA20-11427Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1-.

-- Disengage the lower accelerator pedal module -3- from the pedal bracket and remove.