Engine Temperature Control Actuator -N493-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2020 Audi A5 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .
-- Lift the clamps -arrows-, remove and free up the coolant hoses.
-- Disconnect the connector -1- for the Engine Coolant Level Warning Switch -F66-.
-- Remove the bolt -2- and remove the coolant expansion tank -3-.
All additional procedures are described. Refer to Engine Temperature Control Actuator -N493-, REMOVING AND INSTALLING ; Engine Temperature Control Actuator -N493-, Removing and Installing.