Coolant Pump Toothed Belt, Removing And Installing: Removing
WARNING: This page is about a different car, the 2020 Audi A5 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Remove the bolt -1- and move the bracket -2- with the engine wiring harness to the side.
-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .
-- Lift the clamps -1 and 2- and remove the coolant hoses and push them to the side.
Refer to COOLANT PUMP TOOTHED BELT, REMOVING AND INSTALLING .