LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Cooling System [CWGD,DECA]) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Right Coolant Pipe, Removing And Installing >> Removing

Right Coolant Pipe, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Audi S5, 2022 Audi RS 5 Sportback, 2022 Audi RS 5, 2021 Audi S5, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the ground cable from the battery terminal. Refer to BATTERY, DISCONNECTING AND CONNECTING .

-- Remove the noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Remove the right drive axle cover and right front wheel spoiler. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .

-- Remove the generator. Refer to GENERATOR, REMOVING AND INSTALLING .

-- Remove the bolt -arrow- and move the bracket -1- and wiring harness to the side.

GWWA10-12016Courtesy of AUDI OF AMERICA, LLC

-- Place the container of the :VAS5014  or :VAS6208  underneath.

-- Loosen the hose clamps -1 and 2- and remove the coolant hoses.

GWWA19-12537Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- using the :T10405  and remove the coolant pipe. (On vehicles with 3.0L engine).