REDUCING AGENT (ADBLUE®), FILLING USING AdBlue Filling System: VAS6960

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

AdBlue® Filling System: VAS6960

Fig 1: AdBlue® Filling System VAS6960
Courtesy of AUDI OF AMERICA, LLC

Procedure:

-- Open the fuel filler door and remove the cap for the reducing agent tank.

-- Using a lint-free cotton cloth soaked in water, clean the filler neck for the reducing agent.

-- Guide the nozzle on the AdBlue® Filling System: VAS6960 into the reducing agent tank filler neck.

-- Operate the nozzle and completely fill the reducing agent.

-- Remove the nozzle from the reducing agent tank filler neck.

-- Use a lint-free cotton cloth soaked in water to clean the reducing agent tank filler neck and cap.

-- Attach the cap for the reducing agent tank.

NOTE:

Observe the Owner's Manual for the AdBlue® Filling System: VAS6960 .

The nozzle for the AdBlue® Filling System: VAS6960 switches off automatically when the maximum fill level is reached.