Drive Plate, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi A5 Sportback and 2021 Audi A5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
- The transmission is removed. Refer to the appropriate Service Information .
-- Insert the :10-201 to loosen the bolts.
CAUTION:
Risk of damaging the outer surface of the bearing flange at the drive plate if using unsuitable tools.
- Use an internal multi-point socket with a shaft that is at least 40 mm long to loosen and tighten the drive plate bolts.
-- Remove the bolts and remove the drive plate -1-.