Overview - Windshield, A5 Convertible

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

The following dimensions represent the distances at the marked points. This must also be oriented to the layout of the original adhesive bead on the removed component.

Fig 1: Windshield, A5 Convertible Overview

Courtesy of AUDI OF AMERICA, LLC

Windshield
- Removing and Installing. Refer to WINDSHIELD, REMOVING AND INSTALLING .
- Center the distance to the A-pillars
Adhesive Bead
- Observe minimum curing times. Refer to MINIMUM CURING TIMES FOR BONDED WINDOWS .
- Different distances to window edge:
  - Dimension -a- = 7.6 mm
  - Dimension -b- = 29.6 mm
  - Dimension -c- = 42.3 mm
  - Dimension -d- = 8.8 mm
  - Dimension -e- = 8.6 mm
  - Dimension -f- = 16.2 mm
- Adhesive bead thickness. Refer to Adhesive Application: .
Windshield Frame
Plenum Chamber Cover Frame
- Windshield component
- With a new windshield, remove the protective molding before installing the cowl panel trim. Refer to Figure.
Plenum Chamber Cover
- Insert in the frame -item 4-.
- Only press on until it stops after the minimum curing time for the adhesive.
Spacer
Windshield Frame Trim
Locating Pins
- Quantity: 2
Securing Hole
Side Windshield Frame Trim
Adhesive Bead
- Observe minimum curing times. Refer to MINIMUM CURING TIMES FOR BONDED WINDOWS .
- Market-Specific Version
- No air can be between the adhesive bead -2 and 11-
  - Dimension -g- = 12 mm
- Length of the adhesive bead along the previous adhesive bead
- Adhesive bead thickness. Refer to Adhesive Application: .