Height Adjustment, Checking
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Gauge - Frameless Window: T10391
If the side window causes wind noise, the height adjustment must be checked.
Procedure
-- Determine the measuring point on the side window:
- Dimension -a- = 125 mm, measured from the door window rear edge -1-. Refer to ADJUSTMENT DIMENSIONS - Gap dimension -d- = 125 mm .
-- Position the : T10391 on the upper edge of the side window.
-- Move the side window -1- to the "closed" position and measure the disk immersion depth to the convertible top -2-.
- Dimension -f-. Refer to ADJUSTMENT DIMENSIONS - Gap dimension -f- = 8.8 mm .
-- Adjust the height adjustment if the side adjustment is not OK. Refer to HEIGHT ADJUSTMENT .