Overview - Rear Window, A4 AVANT
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
The following dimensions represent the distances at the marked points. This must also be oriented to the layout of the original adhesive bead on the removed component.
- Rear Window
- Removing and Installing. Refer to REAR WINDOW, REMOVING AND INSTALLING .
- Distance at top to rear lid: dimension -b- = 2 mm
- Center at the sides
- Adhesive Bead
- Observe minimum curing times. Refer to MINIMUM CURING TIMES FOR BONDED WINDOWS .
- Different distances to window edge:
- Dimension -a- = 48.5 mm
- Dimension -c- = 2 mm
- Dimension -d- = 7.5 mm
- Adhesive bead thickness. Refer to Adhesive Application: .
- Rear Window Frame
- In the rear lid
- Spacer
- Place on the markings made on the ceramic coating
- Quantity: 8
- Side Spoiler
- For the rear window
- Removing and Installing. Refer to SIDE SPOILER, REMOVING AND INSTALLING .
- Centering Pin
- Is cut through when removing the window
- Securing Hole