LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 269 (Exterior Equipment) >> 66 Exterior Equipment >> Underbody Trim Panel >> Diagonal Braces, Removing And Installing >> Front Diagonal Braces, Removing And Installing >> Removing

Front Diagonal Braces, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, 2021 Audi RS 5 Sportback, and 2021 Audi A5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Risk of damaging the thread by using an impact wrench.

- When installing, position the bolts by hand and screw in the first threads.

- Do not loosen or tighten the bolts with an impact wrench.

-- Remove the front underbody panel. Refer to FRONT UNDERBODY TRIM PANEL, REMOVING AND INSTALLING .

-- Remove the rear noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING, REAR .

-- Remove the bolts -arrows- and then remove the diagonal brace -1-.

GWWA66-12027Courtesy of AUDI OF AMERICA, LLC