LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 269 (Exterior Equipment) >> 66 Exterior Equipment >> Roof Molding/Roof Railing >> Roof Railing, Removing And Installing >> Installing

Roof Railing, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, 2021 Audi RS 5 Sportback, and 2021 Audi A5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Clean the threaded pin threads on the roof railing with a wire brush.

-- Check the seal for damage.

-- Carefully remove any remaining locking fluid from the nut threads that are installed with locking fluid using a thread tap. Otherwise the threaded pins could lock up when installed and break off when removed again.

-- Insert the roof railing with the alignment pin into the mount on the vehicle roof.

-- Install the nuts with locking fluid and tighten.