LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 269 (Exterior Equipment) >> 66 Exterior Equipment >> Name Badges And Emblems >> Name Badges And Emblems On Sides, Replacing >> Fender Name Badge, Removing And Installing >> Removing

Fender Name Badge, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, 2021 Audi RS 5 Sportback, and 2021 Audi A5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the rear cover for the fender. Refer to REAR FENDER COVER, REMOVING AND INSTALLING .

-- Carefully warm up the name badge -1- using the : VAS1978/14A  .

GWWA66-11799Courtesy of AUDI OF AMERICA, LLC

-- Release the catches in direction of -arrows- and carefully remove the name badge in the area of the bonding.

scientia non olet · About LEMON Manuals