LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 269 (Exterior Equipment) >> 66 Exterior Equipment >> Name Badges And Emblems >> Name Badges And Emblems On Sides, Replacing >> Fender Name Badge, Removing And Installing >> Installing

Fender Name Badge, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, 2021 Audi RS 5 Sportback, and 2021 Audi A5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Remove the adhesive residue from the body.

-- Clean the adhesive surface with Cleaning Solution: D 009 401 04  and let dry.

-- Remove the protective film from the adhesive tape, position the name badge via the securing pin and push in until it engages audibly.

scientia non olet · About LEMON Manuals