Side Windshield Frame Trim, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, 2021 Audi RS 5 Sportback, and 2021 Audi A5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
-- Open the hood.
-- Remove the A-pillar upper trim panel. Refer to A-PILLAR TRIM PANEL, REMOVING AND INSTALLING .
-- Remove the bolt -3-.
-- Remove the retaining studs -1- from the A-pillar.
-- Remove the seal -2- from the A-pillar body flange.
-- Remove the nut -3-.
-- Release the locking tab -1- in direction of -arrow- and pry up the windshield frame trim -2-.
-- Unclip the windshield frame trim -3- from the clip -2- in direction of -arrow A-.
-- Remove the bottom of the windshield frame trim upward from the clip -1- in direction of -arrow B-.