Roof Trim Molding, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, 2021 Audi RS 5 Sportback, and 2021 Audi A5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- A5 Coupe, from 11/2016: disconnect the tabs -3- on the clips -1 and 2- and the marks -arrow-.
-- A5 Coupe: insert the roof trim molding -1- in the clamps -2 and 3- and push on the side window trim molding connecting clamp -4-.
- The clamp must inserted correctly into the guide.
- The roof trim molding be touching the end of the side window trim molding.
-- Rivet the roof trim molding with the rivet -arrow- in the sequence -1 to 9-.