LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 269 (Exterior Equipment) >> 66 Exterior Equipment >> Moldings, Trims, Extensions And Trim Panels >> Sill Panel Trim, Removing And Installing >> Removing

Sill Panel Trim, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, 2021 Audi RS 5 Sportback, and 2021 Audi A5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Versions with illuminated sill panel: 

GWWA66-11711Courtesy of AUDI OF AMERICA, LLC

-- Remove the front sill panel. Refer to SILL PANEL, REMOVING AND INSTALLING .

-- Loosen the inner door seal in the area of the wiring harnesses.

-- Push the carpet to the side.

-- Disconnect the connector -1- and free up the wiring harness -2-.

Continuation: 

GWWA66-11644Courtesy of AUDI OF AMERICA, LLC

-- Carefully warm up the sill panel trim -1- using the : VAS1978/14A  .

-- Carefully pry out the sill panel trim from the side sill in direction of -arrow- using the : 3409  . Do not damage the paint coat while doing so.