LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 269 (Exterior Equipment) >> 66 Exterior Equipment >> Heat Shield >> Rear Heat Shield For Longitudinal Member, Removing And Installing >> Removing

Rear Heat Shield For Longitudinal Member, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, 2021 Audi RS 5 Sportback, and 2021 Audi A5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the plenum chamber bulkhead. Refer to PLENUM CHAMBER BULKHEAD, REMOVING AND INSTALLING .

-- Remove the rear noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING, REAR .

Right: 

GWWA66-11647Courtesy of AUDI OF AMERICA, LLC

-- Remove the front muffler/front exhaust pipe. Refer to OVERVIEW - MUFFLER and OVERVIEW - EMISSIONS CONTROL SYSTEM .

-- Remove the lock washers -arrows-.

-- Remove the heat shield -1-.

Left: 

GWWA66-11648Courtesy of AUDI OF AMERICA, LLC

-- Remove the lock washers -arrows-.

-- Remove the heat shield -1-.